What Front Panel Settings are Required to use the VXI PnP drivers for the SourceMeter Instruments?
Selection and configuration of GPIB or RS-232 communication is
important. Both are supported by the VXI PnP driver, however, the
instrument must be configured from the front panel first.
Use the front panel buttons and select:
select the address (default
is 24) select SCPI protocol (not
488.1) BAUD: 9600 BITS: 8 Parity: NONE Terminator: LF Flow-CTRL:
XON-XOFF instrument at address
24 instrument on COM1 GPIB0::24::INSTR ASRL1::INSTR